Coleman Tent 2000004659 User Manual

®
ElitE SunDOME 6 tEnt  
MODEl 2000004659  
7. Stretch corners and sides of tent until floor is taut then hammer stakes  
Before you begin  
through loops to secure. (Fig. 3B)  
Read all instructions before set up.  
Select a level site clear of rocks, branches, and other hard or sharp objects,  
Fig. 3  
to install your tent.  
WARNING: Keep clear of overhead power lines.  
Do not set up your tent under trees because of potential lightning strikes or  
falling tree limbs in inclement weather.  
Secure with all stakes and guylines provided to prevent property damage or  
personal injury.  
For best results in windy conditions, position narrow end of tent into the wind.  
Enlist the help of at least one other person to assist you when it is time to  
assemble the tent.  
Door  
Pole Descriptions  
Pole  
Pole  
Description  
Qty.  
Repair Kit Replacement Kit  
Main Poles, long, black  
Rainfly Pole, black  
w/metal tips  
Vertical Door Pole, black,  
short w/rubber tips  
2
5010000539  
5010000542  
5010000549  
5010000552  
2
1
1
5010000543 5010000545  
5010000543 5010000545  
Door Pole, black,  
long w/rubber tips  
3A  
3B  
Self-Rolling Window Spring Descriptions  
Color Code Description  
Qty.  
Replacement Part no.  
Hinged, Rigid Door  
1. Assemble Vertical Door Pole (shorter black pole with plastic tips); then insert  
through zippered vertical pole sleeve on hinged side of door. (Fig. 4)  
2. Insert end of Vertical Door Pole into bottom hinge plate, apply pressure to  
form a slight bow, then insert other tip of pole into top hinge. Zip up vertical  
pole sleeve. (Fig. 5 & 6)  
Yellow  
Orange  
1
1
5010000626  
5010000628  
CAUTION: “Springs” may have sharp edges. Handle with care to avoid injury.  
Keep out of reach of children.  
3. Assemble Door Pole (longer black pole with plastic cap tips); then insert into  
zippered pole sleeve at top of door. (Fig. 7)  
to Set up tent  
4. Insert end of Door Pole into top hinge plate, apply pressure to form a bow,  
then insert other tip of pole into the bottom hinge. (Fig. 8)  
5. Zip up pole sleeve to enclose Door Pole. (Fig. 9)  
1. Unfold tent and spread out on a clean, level surface with the door facing the  
desired direction. (Fig. 1)  
2. Assemble two main tent poles by interlocking the longer, black shock-  
corded poles.  
3. Insert both, long, black poles through sleeves in top of tent as shown.  
Fig. 4  
Fig. 5  
Fig. 6  
Vertical Pole  
Sleeve  
(Fig. 1)  
Fig. 1  
Door Hinge  
Long, Black,  
Shock-corded  
Main Poles  
Fig. 8  
Fig. 7  
Door  
Top  
Door  
Pole  
Sleeve  
Hinge  
Fig. 9  
Front of Tent  
to Attach Rainfly  
1. Assemble longer interlocking shock-corded rainfly pole.  
2. Unfold rainfly. Locate the sleeve, along front edge, and the hook & loop  
fasteners on the underside of Rainfly.  
3. Drape Rainfly over tent. Make sure the sleeve is centered over the door and  
the hook & loop fasteners, on the seams on underside of the Rainfly, are  
positioned over the  
4. Insert one end of each black pole  
into pins in front corners of tent.  
(Fig. 2)  
black main poles.  
Rainfly  
Pole  
4. Slide rainfly pole  
through sleeve at front  
of the Rainfly. (Fig. 10)  
Rainfly  
Sleeve  
Fig. 2  
Door  
5. Go to opposite end of each pole and gradually apply pressure to the pole  
forming an arch. Insert the pin into the pole end at the corners of tent.  
(Fig. 3)  
(continued on  
other side)  
Fig. 10  
6. Attach frame clips along edges of tent to black main poles. (Fig. 3A)  
 

Cornelius Refrigerator CH 1500 A User Manual
Craftsman Tiller 917293301 User Manual
Cuisinart Coffeemaker DCC 900 User Manual
Cuisinart Mixer HTM 3 HTM 5 User Manual
Dual Speaker DMS651 User Manual
Dymo Label Maker 500TS User Manual
Fisher Paykel Gas Heater OR24SDMBGX User Manual
Garmin Computer Monitor TR 1 User Manual
GE Cordless Telephone 28851 User Manual
GE Dishwasher PDWT400RBB User Manual