Samsung Computer Monitor 170T User Guide

SyncMaster 170T  
Dual Interface(Analog/Digital)  
Flat Panel Monitor  
Owner’s  
Instructions  
 
Ta b l e o f C o n t e n t s  
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Unpacking Your LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Setting up your LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Setting up an Ergonomic Workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Monitor location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Workstation height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Viewing angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Kensington Security Slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Connecting Your LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Plug and Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Auto Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Self-Test Feature Check (STFC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Adjusting Your LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
User Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Automatic Save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Direct-Access Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Auto Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
OSD Lock/Unlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
On-Screen Menu System (OSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Accessing the Menu System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
PowerSaver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Pin Assignments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Display Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Changing the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Removing the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Attaching an Arm-Type Stand or Wall Mount Hanger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Maintenance of Your LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See back of Manual  
English  
1
 
S a f e t y In s t r u c t i o n s  
Before connecting the AC power cord to the DC adapter outlet, make sure the voltage  
designation of the DC adapter corresponds to the local electrical supply.  
Never insert anything metallic into the openings in the cabinet of the liquid cristal display  
(LCD) monitor; doing so may create the danger of electric shock.  
To avoid electric shock, never touch the inside of the LCD Monitor. Only a qualified  
technician should open the case of the LCD Monitor.  
Never use your LCD Monitor if the power cord has been damaged. Do not allow anything  
to rest on the power cord, and keep the cord away from areas where people can trip over  
it.  
1
2
3
4
Be sure to hold the plug, not the cord, when disconnecting the LCD Monitor from an  
electric socket.  
Openings in the LCD Monitor cabinet are provided for ventilation. To prevent overheating,  
these openings should not be blocked or covered. Also, avoid using the LCD Monitor on a  
bed, sofa, rug, or other soft surface. Doing so may block the ventilation openings in the  
bottom of the cabinet. If you put the LCD Monitor in a bookcase or some other enclosed  
space, be sure to provide adequate ventilation.  
5
6
Put your LCD Monitor in a location with low humidity and a minimum of dust  
7
8
Do not expose the LCD Monitor to rain or use it near water (in kitchens, near swimming  
pools, etc.). If the LCD Monitor accidentally gets wet, unplug it and contact an authorized  
dealer immediately. You can clean the LCD Monitor with a damp cloth when necessary, but  
be sure to unplug the LCD Monitor first.  
Place the LCD Monitor on a solid surface and treat it carefully. The screen is made of thin  
glass with a plastic front surface and can be damaged if dropped, hit or scratched. Do not  
clean the front panel with keton-type materials (e.g., acetone), ethyl alcohol, toluene, ethyl  
acid, methyl, or chloride – these may damage the panel.  
9
Locate your LCD Monitor near an easily accessible AC outlet.  
10  
11  
If your LCD Monitor does not operate normally – in particular, if there are any unusual  
sounds or smells coming from it – unplug it immediately and contact an authorized dealer  
or service center.  
High temperature can cause problems. Don’t use your LCD Monitor in direct sunlight, and  
keep it away from heaters, stoves, fireplaces, and other sources of heat.  
Unplug the LCD Monitor when it is going to be left unused for an extended period of time.  
12  
13  
14  
Unplug your LCD Monitor from the AC outlet before any service.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER  
(OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
English  
2
 
U n p a c k i n g Y o u r LC D M o n i t o r  
Please make sure the following items are included with your monitor. If any items are  
missing, contact your dealer.  
Power Cord  
Colorific  
& Driver  
AUTO EXIT  
MENU  
A
B
15-pin D-Sub Signal Cable  
Warranty Card  
(not available everywhere)  
Monitor and Base  
DC-Adapter  
DVI-D Signal Cable  
(Optional)  
Manual  
English  
3
 
S e t t i n g u p y o u r LC D M o n i t o r  
Setting up an Ergonomic Workstation  
Consider the advice given below before you install your monitor.  
Monitor location  
Choose a position that exposes you monitor to the least reflection from lights or windows,  
usually at a right angle to any window.  
Workstation height  
Place your LCD Monitor so that the top of the screen is slightly below your eye level when  
you are comfortably seated.  
Viewing angle  
Tilt the screen backward or forward to a comfortable viewing position.  
AUT  
O
MENU  
Figure 1. Tilt the screen  
Kensington Security Slot  
This monitor offers you the opportunity to secure your monitor using a Kensington-type  
security device. Kensington lock not included. Refer to your locking device documentation for  
installation instructions.  
Figure 2. Kensington-type security slot location  
English  
4
 
S e t t i n g u p y o u r LC D M o n i t o r  
Connecting Your LCD Monitor  
This monitor offers a method for connection to both a PC and a workstation. One or both  
types of signal cables can be connected to the monitor simultaneously. Determine which  
connection method(s) you need and refer to the instructions below.  
2
4
3
Figure 3. Cable connections (Analog)  
Turn off your system and unplug its power cord.  
1
2
3
4
5
6
Attach the blue signal cable connector to the video port on the back of your computer.  
Connect the power cord for your monitor to the power port on the power adapter.  
Plug the power cords of your computer and your monitor into a nearby outlet.  
Turn on your computer and monitor. If your monitor displays an image, installation is  
complete.  
Perform the auto adjustment procedure as described in “Auto Adjustment” on page 7.  
English  
5
 
S e t t i n g u p y o u r LC D M o n i t o r  
(b)  
(a)  
(1)  
Figure 4. Cable connections (Digital)  
Turn off your computer and unplug its power cord.  
1
2
3
4
5
6
7
8
Connect the signal cable to the DVI-D connector (1) on the back of your monitor.  
Connect the other end of the cable to the video port on the back of your workstation.  
Connect the power cord for your monitor to the power port on the power adapter.  
Secure the power adapter cord and the signal cable(s) under the metal prong.  
Insert the tab on each side of the hinge cover (b) then attach the stand of the monitor.  
Plug the power cords of your computer and your monitor into a nearby outlet.  
Turn on your computer and monitor. If your monitor displays an image, installation is  
complete.  
Perform the auto adjustment procedure as described in “Auto Adjustment” on page 7.  
English  
6
 
S e t t i n g u p y o u r LC D M o n i t o r  
Getting Help  
If your monitor does not display an image, check your cable connections and refer to  
“Troubleshooting” on page 17. If you experience difficulties with the quality of the displayed  
image, run auto adjustment again and refer to “Adjusting Your LCD Monitor” on page 10 or  
“Troubleshooting” on page 17.  
Plug and Play  
®
Our adoption of the new VESA Plug and Play solution eliminates complicated and time  
consuming setup. It allows you to install your monitor in a Plug and Play compatible system  
without the usual hassles and confusion. Your PC system can easily identify and configure  
itself for use with your display. This monitor automatically tells the PC system its Extended  
Display Identification (EDID) data using Display Data Channel (DDC) protocols so the PC  
system can automatically configure itself to use the LCD Monitor.  
Auto Adjustment  
Even though your computer system can recognize your new LCD Monitor system, the auto  
adjustment function will optimize the display settings for use with your computer. Auto  
Adjustment can be accessed through the  
On-Screen Menu, see “Image Lock:” on page 13 or use the direct access instructions below:  
Turn on your computer and monitor.  
1
2
3
Push the AUTO button to open the Auto Adjustment OSD.  
The screen will dim and you may notice small changes to the screen image.  
English  
7
 
S e t t i n g u p y o u r LC D M o n i t o r  
Self-Test Feature Check (STFC)  
Your monitor provides a self test feature that allows you to check whether your monitor is  
functioning properly. If your monitor and computer are properly connected but the monitor  
screen remains dark and the power indicator is blinking, run the monitor self-test by  
performing the following steps:  
Turn off both your computer and the monitor.  
1
2
3
Unplug the video cable from the back of the computer.  
Turn on the monitor.  
If the monitor is functioning properly, you will see a white box with a red border and black  
text inside as shown in the following illustration:  
No Connection  
Check Signal Cable  
Figure 5. Monitor self test screen  
The three boxes inside the border are red, green and blue. Failure of any of the boxes to  
appear indicates a problem with your monitor. This box also appears during normal operation  
if the video cable becomes disconnected or damaged.  
Turn off your monitor and reconnect the video cable; then turn on both your computer  
4
and the monitor.  
If your monitor screen remains blank after using the previous procedure, check your video  
controller and computer system; your monitor is functioning properly.  
English  
8
 
A d j u s t i n g Y o u r LC D M o n i t o r  
User Controls  
Your LCD Monitor allows you to easily adjust the characteristics of the image being  
displayed. All of these adjustments are made using the control buttons on the front of the  
monitor. While you use these buttons to adjust the controls, an on-screen menu shows you  
their numeric values as the change.  
1
3
4
2
5
AUTO EXIT  
MENU  
A
B
Figure 6. User controls  
No.  
Name  
Description  
Activates the Auto Adjustment function  
AUTO  
EXIT  
1
Exits from the OSD while the OSD is displayed  
Slects the Video signal (A or B) while the OSD is off  
2
3
Moves the selector between menus and sub-menus on  
the OSD  
Decreases or increases values of the selected function  
Directly adjusts the brightness level if pressed while the  
OSD is off (See the section on "Direct-Access Features" on  
page 10.)  
/ +  
Brightness  
MENU  
Opens the OSD and sub-menus  
Selects the highlighted function  
4
5
Turns the monitor on and off  
Power button  
and indicator  
light  
Glows green during normal operation  
Glows amber, blinks amber, or blinks green / amber while  
the monitor is in a power saving mode. (See "Power-  
saving modes" on page 16.)  
English  
9
 
A d j u s t i n g Y o u r LC D M o n i t o r  
Automatic Save  
Whenever you open the on-screen menu and allow an adjustment window to remain active  
for about 3 seconds without pressing another button, the monitor automatically saves any  
adjustments you have made. These changes are saved into a user area in the monitor. User  
areas are reserved according to the signal frequency from your computer. The monitor can  
save adjustments for up to 5 user modes. It has ten factory preset or preload modes, one for  
each signal frequency as listed in “Display Modes” on page 21  
If you have made no adjustments, the on-screen menu disappears and the monitor does not  
save anything. To exit without saving the changes you have made, press the EXIT button  
before the 2 seconds elapse.  
Direct-Access Features  
The features described in this section can be accessed quickly, at the touch of one button.  
Once you finish making adjustments to a feature, push the EXIT button to turn off the menu  
or allow the OSM to time-out and disappear automatically.  
Brightness  
Follow these instructions to adjust the brightness of  
the monitor’s display.  
Brightness  
99  
With the menu off, push the “” or “+”  
1
2
button. The brightness display appears.  
Push the +” button to increase the  
brightness; push the “” button to decrease  
the brightness.  
English 10  
 
A d j u s t i n g Y o u r LC D M o n i t o r  
Auto Adjustment  
Follow these instructions to enable or disable the  
automatic screen adjustments for your monitor.  
Auto Adjustment  
25  
With the menu off, push the EXIT button.  
1
2
The automatic adjustment display appears.  
Follow the directions previously given on  
page 7.  
OSD Lock/Unlock  
Use this function to secure the current settings, while allowing you to adjust the Brightness  
and Contrast, so that they cannot be inadvertently changed. You can unlock the OSD controls  
at any time by using the same procedure.  
Push and hold the MENU button for 5 seconds to Lock or Unlock the controls. When  
locked, a “LOCKED” message displays.  
1
English 11  
 
A d j u s t i n g Y o u r LC D M o n i t o r  
On-Screen Menu System (OSD)  
Function icons  
Brightness  
Function name  
Setting slidebar  
99  
Numeric value  
indicator  
Figure 7. On-Screen Menu (OSD)  
Accessing the Menu System  
With the menu off, push the MENU button to open the menu system and display the  
1
2
main function menu.  
Push the ““ and “+“ buttons to move between the function icons. As you move from  
one icon to another, the function name changes to reflect the function or group of  
functions represented by that icon. See the Menu adjustments table to view a  
complete list of all the functions available for the monitor.  
Push the MENU button once to activate the highlighted function then use the “” and  
3
4
+” buttons, according to the indicators on the menu, to make your changes.  
Push the EXIT button once to return to the main menu to select another function or  
push the EXIT button 1 or 2 times to exit from the OSD.  
English 12  
 
A d j u s t i n g Y o u r LC D M o n i t o r  
Table 1. Menu Adjustments  
Settings and  
Sub-menus  
Icon  
Description  
Image Lock:  
Image Lock controls adjust for and limit the amount of  
noise in the video signal which causes horizontal lines  
or areas on the screen where the image appears to be  
unstable and jitters or shimmers.  
Fine  
Coarse  
The Fine and Coarse adjustments allow you to more  
closely adjust your monitor to your preference.  
Use the “, +” buttons to adjust away interference.  
If satisfactory results are not obtained using the Fine  
adjustment, use the Coarse adjustment and then use  
Fine again.  
This function may change the width of the display  
image. Use the Horizontal function on the Position  
menu to center the display image on the screen.  
Position:  
Position moves the viewing area around on the  
monitor screen.  
Horizontal  
Vertical  
Color Control:  
Color Controls adjust the color hue and saturation. The  
color hue is most noticeable in areas of white.  
R(ed)  
G(reen)  
B(lue)  
English 13  
 
A d j u s t i n g Y o u r LC D M o n i t o r  
Table 1. Menu Adjustments (Continued )  
Settings and  
Sub-menus  
Icon  
Description  
Reset:  
Reset controls return the settings to the factory preset  
values for the selected group of functions. Geometry  
changes the Position settings, Image Lock settings  
and changes the Image Size to Expand 2.  
Color changes the RGB settings back to their original  
factory settings.  
Geometry  
Color  
Language:  
Language sets the OSD to display in one of six  
languages (English, French, German, Spanish, Italian,  
or Svenska).  
The language chosen affects only the language of the  
OSD. It has no effect on any software running on the  
computer.  
English  
Deutsch  
Español  
Français  
Italiano  
Svenska  
Menu Display  
Time:  
The OSD stays active for as long as it is in use. Menu  
Display Time sets the length of time the OSD will  
remain active after the last time you pushed a button.  
5 Seconds  
10 Seconds  
20 Seconds  
200 Seconds  
Menu Position:  
Each time the OSD opens it displays in the same  
location on the screen. Menu Position controls that  
location.  
Horizontal  
Vertical  
English 14  
 
A d j u s t i n g Y o u r LC D M o n i t o r  
Table 1. Menu Adjustments (Continued )  
Settings and  
Sub-menus  
Icon  
Description  
Image Size:  
If your computer or video board supplies a signal rate  
and addressability lower than 1280 x 1024, this LCD  
Monitor provides a scaling processor that can expand  
the addressability up to 1280 x 1024.  
Normal  
Expanded 1  
Expanded 2  
Select the Normal setting to use the normal size  
viewing area for the current signal. Expanded 1  
expands the viewing area to the full width of the  
monitor screen. Expanded 2 extends the viewing area  
both horizontally and vertically to the full size of the  
monitor screen.  
Image Effect:  
Image Effect optimizes the display for the type of  
software you are using.  
Scaling smooths an image which may help the eye to  
see more detail.  
Scaling  
Filtering  
Filtering sharpens text by adding a fine, contrasting  
line around each character so that it is easier to  
recognize.  
English 15  
 
A p p e n d i x  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves  
energy by switching your monitor into a low-power mode when it has not been used for a  
certain amount of time. The available modes are “On”, “Standby”, “Sleep”, and “Deep  
Sleep”.  
PowerSaver operates with a VESA DPMS compliant video card installed in your computer.  
You use a software utility installed on your computer to set up this feature. See Table 2  
below for details.  
Table 2. Power-saving modes  
Power-Saving Function mode (EPA/NUTEK)  
Normal  
State  
Sleep Mode  
Position A1  
Deep Sleep Mode  
Position A2  
Operation  
Standby Mode  
Horizontal Sync  
Vertical Sync  
Video  
Active  
Active  
Active  
Inactive  
Active  
Blanked  
Active  
Inactive  
Blanked  
Inactive  
Inactive  
Blanked  
Power  
Indicator  
Green  
Amber  
Green/Amber  
Blinking  
Amber  
Blinking  
(0.5 sec. interval) (1 sec. interval)  
Power  
Consumption  
42W (Max.)  
40W (Nom.)  
Less than 5W  
Less than 5W Less than 5W  
NOTE: This monitor automatically returns to normal operation when horizontal and vertical  
sync return. This occurs when you move the computer’s mouse or press a key on the  
keyboard.  
®
This monitor is EPA ENERGY STAR compliant and NUTEK compliant when used with a  
computer equipped with VESA DPMS functionality.  
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it  
unattended for long periods.  
English 16  
 
A p p e n d i x  
Troubleshooting  
Before calling for service, check the information in this section to see if you can remedy any  
problems yourself  
Table 3. Troubleshooting problems  
Symptom  
Corrective Actions  
Check to see that both the LCD Monitor and the  
computer are plugged in and turned on.  
No Picture  
Check the signal cable connection between the  
computer and the LCD Monitor  
“No Connection,  
Check Signal Cable” appears  
Use the LCD Monitor self test described on page 8.  
Check the maximum resolution and the frequency on  
the video port of your computer.  
“Video mode not supported”  
Picture is scrambled  
Compare these values with the data in the preset  
timing modes, page 21.  
Check the signal cable connection between the  
computer and LCD Monitor.  
Perform Auto Adjustment (see page 7).  
Adjust Fine and Coarse adjustments as needed (see  
page 13).  
Picture is not clear  
Picture is fuzzy  
Perform LCD Monitor reset.  
Eliminate accessories (i.e., video extension cables).  
Check the signal cable connection between the  
computer and LCD Monitor  
Picture bounces or has wavy  
oscillations  
Check the signal cable connection between the  
computer and LCD Monitor.  
Picture appears to be ghosting  
Adjust the Brightness and Contrast settings.  
The image is too light or too dark  
Color is not uniform  
Adjust the color settings using the OSD COLOR menu.  
Adjust the color settings using the OSD COLOR menu.  
The colors are distorted with dark or  
shadowed areas  
English 17  
 
A p p e n d i x  
Table 3. Troubleshooting problems (Continued )  
Symptom  
Corrective Actions  
Adjust the color settings using the OSD COLOR menu.  
White does not look white  
Adjust the Horizontal and Vertical position settings  
using the OSD.  
Screen image is not centered or  
sized properly  
Check the image size selection (see page 15).  
Run Auto Adjustment (see page 7).  
The LCD Monitor is saving your changes to the OSD.  
The power indicator blinks amber  
once  
The LCD Monitor is using its power management  
system. Check the power management utility on your  
computer.  
The power indicator is blinking  
green/amber or is blinking amber  
only  
Please contact Samsung customer service.  
Cannot adjust LCD Monitor with the  
buttons on the front panel  
You can download the driver from the internet at  
downloads/monitor/index.html  
You need the monitor driver  
software  
English 18  
 
A p p e n d i x  
Specifications  
Table 4. Specifications  
Analog Input  
Digital Input  
LCD Monitor Panel  
* Synchronization  
43 cm (17") LCD Monitor  
0.264 mm Pixel pitch  
Viewing Angle: 80/80/80/80 (U/D/L/R) (Degrees)  
Horizontal: 30 kHz to 81 kHz  
Vertical: 56 Hz to 85 Hz (~XGA)  
60 Hz to 76 Hz (SXGA)  
Horizontal: 30 kHz to 63.3 kHz  
Vertical: 60 Hz to (SXGA)  
56 Hz to 85 Hz (~XGA)  
Display Colors  
16.7 Million Colors  
Maximum Resolution  
Horizontal:  
Vertical:  
1280 Dots @ 81 kHz  
1024 Lines @ 76 Hz  
1280 Donts @ 63.3 kHz  
1024 Lines @ 60 Hz  
Active Display  
Horizontal:  
Vertical:  
338 3 mm (13.3" 0.12”)  
270 3 mm (10.6" 0.12”)  
(Active display size is dependent upon signal timing and image size  
selection.)  
Input Signal, Terminated Analog video 0.7 Vpp positive at 75 Ω  
TMDS  
Separate sync, composite, and sync-on-  
green  
Maximum Pixel Clock  
Power Adapter  
135 MHz  
108 MHz  
AC 90-264 Volt, 60 Hz/50 Hz 3 Hz  
42 W (Maximum), 40 W (Nominal)  
Power Consumption  
Dimensions/Weight  
(W x D x H)  
Unit:  
440 x 220 x 458.5 mm; 8 kg (17.3 x 8.7 x 18.1 in; 17.6 lb)  
Carton: 570 x 580 x 315 mm; 10.4 kg (22.4 x 22.8 x 12.4 in; 23 lb)  
(All measurements approximate)  
VESA Mounting  
Interface  
100 mm x 100 mm  
(For use with Specialty (Arm) Mounting hardware.)  
Environmental  
Considerations  
Operating Temperature: 50°F to 104°F (10°C to 40°C)  
Humidity: 10% to 80%  
Storage Temperature: -68°F to 113°F (-20°C to 45°C)  
Humidity: 5% to 95%  
NOTE: Design and specifications are subject to change without prior notice.  
* Referring to Standard signal modes, see page 21.  
English 19  
 
A p p e n d i x  
Pin Assignments  
Table 5. 15-Pin D-SUB connector  
15-Pin Side of the  
Signal Cable  
15-Pin Side of the  
Signal Cable  
Pin No.  
Pin No.  
1
2
3
4
5
6
7
8
Red  
Green  
Blue  
9
NC  
GND-Sync/Self test  
GND  
10  
11  
12  
13  
14  
15  
GND  
GND (DDC Return)  
GND-R  
DDC Data  
H-Sync  
V-Sync  
GND-G  
GND-B  
DDC Clock  
Table 6. DVI-D Connector  
Pin  
Signal Assignent  
Pin  
Signal Assignen  
1
2
T.M.D.S. Data2-  
T.M.D.S. Data2+  
T.M.D.S. Data2 Shield  
No Connect  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
No Connect  
+5V Power  
3
Ground(for +5V)  
Hot Plug Detect  
T.M.D.S. Data0-  
T.M.D.S. Data0+  
T.M.D.S. Data0 Shield  
No Connect  
4
5
No Connect  
6
DDC Clock  
7
DDC Data  
8
No Connect  
9
T.M.D.S. Data1-  
T.M.D.S. Data1+  
T.M.D.S. Data1 Shield  
No Connect  
No Connect  
10  
11  
12  
T.M.D.S. Clock Shield  
T.M.D.S. Clock+  
T.M.D.S. Clock-  
English 20  
 
A p p e n d i x  
Display Modes  
For the display modes listed below, the screen image has been optimized during  
manufacture.  
Table 7. Preset timing modes  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
720 x 400  
640 x 480  
640 x 480  
640 x 480  
800 x 600  
31.469  
31.469  
37.500  
43.269  
46.875  
53.674  
48.363  
60.023  
68.677  
79.976  
63.300  
70.087  
59.940  
75.000  
85.008  
75.000  
85.061  
60.004  
75.029  
84.997  
75.025  
60.000  
28.322  
25.175  
31.500  
36.000  
49.500  
56.250  
65.000  
78.750  
94.500  
135.000  
108.000  
–/+  
–/–  
–/–  
–/–  
+/+  
+/+  
–/–  
+/+  
+/+  
+/+  
–/–  
A
800 x 600  
1024 x 768  
1024 x 768  
A
1024 x 768  
A
1280 x 1024  
1280 x 1024  
A
Display modes marked  
will be blocked during “Digital Input.”  
English 21  
 
A p p e n d i x  
Changing the Stand  
Removing the Stand  
(a)  
Turn off your monitor and unplug its power cord.  
1
2
3
Lay the LCD Monitor face-down on a flat surface with a cushion beneath it to protect the  
screen.  
Remove the 4 screws (a) and then remove the Stand from the LCD Monitor.  
English 22  
 
A p p e n d i x  
Attaching an Arm-Type Stand or Wall Mount Hanger  
NOTE: This monitor accepts a 100mm x 100mm VESA-compliant mounting interface pad.  
Rear cover  
Mounting  
Interface Pad  
Align the Mounting Interface Pad with the holes in the Rear Cover and secure it with  
the four screws that came with the Arm-type Stand or Wall Mount Hanger.  
1
Maintenance of Your LCD Monitor  
WARNING: To avoid risk of electric shock, do not disassemble the monitor cabinet (except  
for gaining access to the cable connectors as described on page 6). Users cannot service the  
monitor. User maintenance is restricted to cleaning as explained below:  
Unplug the monitor from the power outlet before cleaning.  
To clean your LCD Monitor screen, lightly dampen a soft, clean cloth with water or  
mild detergent. If possible, use a special screen cleaning tissue or solution suitable  
for the antistatic coating.  
To clean the monitor cabinet, use a cloth lightly dampened with a mild detergent.  
Never use flammable cleaning material to clean your LCD Monitor or any other  
electrical apparatus.  
English 23  
 
R e g u l a t o r y In f o r m a t i o n  
The party responsible for product compliance:  
SAMSUNG ELECTRONICS CO., LTD  
America QA Lab of Samsung  
85 West Tasman Drive  
FCC Information  
User Instructions  
The Federal Communications Commission Radio  
Frequency Interference Statement includes the  
San Jose, CA 95134 USA  
following warning:  
Tel) 408-544-5124  
Fax) 408-544-5191  
Note: This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
Provided with this monitor is a detachable power  
pursuant to Part 15 of the FCC Rules. These limits are  
supply cord with IEC320 style terminations. It may be  
designed to provide reasonable protection against  
suitable for connection to any UL Listed personal  
harmful interference in a residential installation. This  
computer with similar configuration. Before making the  
equipment generates, uses, and can radiate radio  
connection, make sure the voltage rating of the  
frequency energy and, if not installed and used in  
computer convenience outlet is the same as the  
accordance with the instructions, may cause harmful  
monitor and that the ampere rating of the computer  
interference to radio communications. However, there  
convenience outlet is equal to or exceeds the monitor  
is no guarantee that interference will not occur in a  
voltage rating.  
particular installation.  
For 120 Volt applications, use only UL Listed detachable  
If this equipment does cause harmful interference to  
power cord with NEMA configuration 5-15P type  
radio or television receptions, which can be determined  
(parallel blades) plug cap. For 240 Volt applications use  
by turning the equipment off and on, the user is  
only UL Listed Detachable power supply cord with  
encouraged to try to correct the interference by one or  
NEMA configuration 6-15P type (tandem blades) plug  
more of the following measures:  
cap.  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
IC Compliance Notice  
Connect the equipment into an outlet on a circuit dif-  
ferent from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV tech-  
nician for help.  
This Class B digital apparatus meets all requirements  
of the Canadian Interference-Causing Equipment  
Regulations of ICES-003.  
Cet appareil Numérique de classe B respecte toutes les  
exigences du Règlemont ICES-003 sur les équipements  
produisant des interférences au Canada.  
User Information  
Changes or modifications not expressly approved by the  
party responsible for compliance could void the user’s  
authority to operate the equipment.  
If necessary, consult your dealer or an experienced  
radio/television technician for additional suggestions.  
You may find the booklet called How to Identify and  
Resolve Radio/TV Interference Problems helpful. This  
booklet was prepared by the Federal Communications  
Commission. It is available from the U.S. Government  
Printing Office, Washington, DC 20402, Stock Number  
004-000-00345-4.  
MPR II Compliance  
This monitor complies with SWEDAC(MPR II)  
recommendations for reduced electric and magnetic  
fields.  
European Notice  
Products with the CE Marking comply with both the  
EMC Directive (89/336/EEC), (92/31/EEC), (93/68/EEC)  
and the Low Voltage Directive (73/23/EEC) issued by  
the Commission of the European Community.  
Compliance with these directives implies conformity to  
the following European Norms:  
Warning  
User must use shielded signal interface cables to  
maintain FCC compliance for the product.  
Declaration of conformity for products  
Marked with FCC Logo  
EN55022 (CISPR 22) – Radio Frequency Interference  
EN50082-1 : 1992 – Electromagnetic Immunity  
EN60555-2 (IEC555-2) – Power Line Harmonics  
EN60555-3 (IEC555-3) – Voltage Fluctuations  
EN60950 (IEC950) – Product Safety.  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions: (1)  
this device may not cause harmful interference, and (2)  
this device must accept any interference received,  
including interference that may cause undesired  
operation.  
 
U.S.A. :  
Samsung Electronics America (SEA)  
One Samsung Place  
Ledgewood, NJ 07852  
Tel. : 1-800-SAMSUNG (1-800-726-7864)  
ESPAÑA :  
Samsung Electrónics Comercial Ibérica, S.A.  
Ciencies, 55-65 (Polígono Pedrosa) 08908  
Hospitalet de Llobregat (Barcelona)  
Tel. : (93) 261 67 00  
Fax. : (93) 261 67 50  
CANADA :  
Samsung Electronics Canada Inc.  
7037 Financial Drive  
Mississauga, Ontario L5N 6R3  
Tel. : 1-800-SAMSUNG (1-800-726-7864)  
Fax. : (905) 542-1199  
UK :  
Samsung Electronics (UK) Ltd.  
Samsung House, 225 Hook Rise South  
Surbiton, Surrey KT6 7LD  
Tel. : (0181) 391 0168  
Fax. : (0181) 397 9949  
GERMANY :  
<European Service Center & National Service>  
Stafford Park 12 Telford, Shropshire, TF3 3BJ  
Tel. : (01952) 292 262  
Samsung Electronics GmbH Samsung-Haus  
Am Kronberger Hang 6/65824 Schwalbach/Ts.  
Tel. : 06196-66-1134  
Fax. : (01952) 292 033  
Fax. : 06196-66-1133  
THAILAND :  
AUSTRALIA :  
Samsung Service Center  
Samsung Electronics Australia Pty Ltd.  
Unit G, 10-16 South Street,  
Rydalmere, N.S.W. 2116  
P.O. BOX 368  
729-729/1 JSP Tower Rachadapisek RD.,  
Bangpongpang, Yannawa, Bangkok 10120  
Tel : (662) 2954508-14  
Fax : (662) 2954267  
Tel. : (02) 638-5200  
SOUTH AFRICA :  
ITALIA :  
Samsung Electronics Italia SpA  
Via C. Donat Cattin,  
5-20063 Cernusco sul Naviglio (Mi)  
Tel. : 167-010740  
Samsung Electronics South Africa  
Somerset Office Park 5 Libertas Road  
Bryanston, South Africa  
Tel : (27)-11-463-5678  
Fax : (27)-11-463-5215  
PANAMA :  
BRASIL :  
Servicios Samsung (Zona Libre), S.A.  
50 and 61 Streets Sta, Cecilia  
Bdl. Don Camilo, Panama City  
Tel. : (507) 264-0195 or 269-5571  
Fax : (507) 269-5568  
Samsung Eletrônica da Amazonia Ltda.  
R. Prof. Manoelito de Ornellas, 303-2º Andar  
Chácara Sto. Antônio • cep : 04719-040  
São Paulo • SP  
Tel. : (011) 541-8500  
Fax : (011) 523-3995, 522-0726  
MEXICO  
Samsung Electronics Mexico S.A. de C.V.  
Saturno 44 Col. Nva. Industrial Vallejo  
Del. Gustavo A. Madero C.P. 07700  
SWEDEN:  
Samsung Electronics Svenska, AB  
Box 713, S-194 27 Upplands Vasby  
Tel.: (468) 590-966-00  
Mexico D.F.  
RFC: SEM950215S98  
Tel. 5747-5100  
Fax : (468) 590-966-50  
IMPORTADO POR:SAMSUNG ELECTRONICS MEXICO S.A. DE C.V.  
SATURNO 44 COL. NVA. INDUSTRIAL VALLEJO  
DEL. GUSTAVO A. MADERO C.P. 07700  
“As an ENERGYSTAR® Partner, SAMSUNG has  
determined that this product meets the  
ENERGYSTAR® guidelines for energy efficiency.”  
MEXICO D.F.  
TEL. 5747-5100  
RFC: SEM950215S98  
EXPORTADO POR: SAMSUNG ELECTRONICS CO.,LTD.  
JOONG-ANG DAILY NEWS BLDG.  
P/N: BN68-00147B-00  
7 SOON-WHA-DONG CHUNG-KU,  
C.P.O BOX 2775, 1144 SEOUL, KOREA  
Printed on recyclable paper  
 

Ricoh Window GLD0 0025 01 User Guide
Roland Recording Equipment SCWS03 User Guide
Royal Sovereign Paper Shredder AFS 800 User Guide
Samson Speaker 3a User Guide
Samsung DVD Player DVD VR320 User Guide
Samsung Microwave Oven GE87L User Guide
Sanus Systems TV Mount VMPL250 User Guide
Seagate Computer Accessories ST9100826A User Guide
SECO LARM USA Switch EVT PH16 4T2 User Guide
Sennheiser Fish Finder RS120 User Guide